27
Ti-P1 Training
Slide 27
Eco Night Sensor - 3
If the controller is executing a process, the Light Detect
Function activates after the process is completed.
Light Detect also cannot activate if printing stopped due to
a lack of paper or a paper jam.
If a spooled print job is stored in the machine, the machine
cannot activate Light Detect.
After the Light Detect Function turns off the power, the
machine cannot power on by itself if Timer to Turn On is
disabled. To power on the machine, the main power switch
has to be turned on manually.
If Timer to Turn On is enabled, then the machine will turn
itself on when the ambient light increases above a set level.
No additional notes
