137
Ti-P1 Training
Slide 137
2. Energy Saving
2.1 Overview – 1
No power is supplied to the printing engine, and almost none to the controller.
Sleep Mode
Description
Energy Saver Modes
Power
Consumption
Warm-up Operation Mode
Ready Mode
Sleep Mode
Timer Starts
Sleep Mode Timer
1 – 240 min
After 240 min
from last job
Plug In
Time
Energy
Saving
When the machine is not being used, the machine enters energy saver mode
to reduce the power consumption by turning off the LCD of the operation
panel and lowering the fusing temperature.
The area shaded green in this diagram represents the amount of energy that
is saved when the timers are at the default settings. If the timers are
changed, then the energy saved will be different. For example, if the timers
are all set to 240 minutes, the green area will disappear, and no energy is
saved before 240 minutes expires.
Power consumption during warm-up may be much higher than shown in this
diagram.
