Ricoh R4, User Manual, Page: 31 / 188

29
Quic
k Gui
d
e
Using the camera shake correction function to prevent
blurring due to camera shake
Turning on the camera shake correction function minimizes blurring
due to camera shake.
At the time of purchase, the camera shake correction function is
turned on.
1.
With the camera ready to shoot,
press the
E
(Camera Shake
Correction) button.
The camera shake correction function is
turned on, and the
E
mark appears on
the LCD monitor.
To turn off the camera shake correction
function, press the
E
(Camera Shake
Correction) button again.
Note
• The camera shake correction function is not available during Multi-Shot shooting, long time
exposure and movie shooting. If Multi-Shot shooting or long time exposure is set while the
camera shake correction function is turned on,
E
changes to
F
.
E
disappears
when the Mode Selector is switched to
3
(Movie Mode).
• The camera shake correction function cannot prevent movement of the shooting subject
(caused by wind, etc.).