Ricoh R4 Page 139 User Manual Download

Page: 139 / 188

137

alli
ng Sof

are

Software that can be installed from the Caplio Software
CD-ROM

Once you insert the Caplio Software
CD-ROM in the CD-ROM drive, the
following screen appears
automatically:

When [Installing the software] is clicked: (P.141)

The following software will be installed:

XP: Windows XP

98: Windows 98/98SE/Me/2000

Item Name

Description

Refer to

Installing the Software

Use this button to install software required for handling the
camera and images.

P.141

Installing DeskTopBinder Lite

P.143

Browse User’s Manual
(Software Version)

Click this to display the “Software User Guide” (PDF).

P.139

Browse CD-ROM Content

Click this to display the list of files contained on the CD-ROM.

P.139

Software

Windows

Description

RICOH Gate La

Downloads images collectively.

ImageMixer

Shot images can be displayed or edited and video CDs can be created.
DirectX (P.152) is necessary for handling movies.

USB Driver

Used to connect the camera to the computer.

WIA Driver

Used to download images.

Summary of Contents for R4





























































































































































































Search results

Summary of Contents for R4

Reviews:

Related manuals for R4

Brands by name

Popular brands

Ricoh R4, User Manual

Search results

Summary of Contents for R4

Reviews:

Related manuals for R4

Brands by name

Popular brands