manualshive.com logo in svg

Ricoh PRSPC342DN1, User Manual, Page: 96 / 120

Share
Download
Ricoh PRSPC342DN1 User Manual Download Page 96

2.

Select Wireless LAN as the network interface to be used.

[LAN Type]   [Wireless LAN]   [OK]

3.

Press [Exit].

4.

Press [Wireless LAN], and then specify the transmission mode and the channel to be
used for transmission.

• [Communication Mode]

Specify the transmission mode for the Wireless LAN.
[802.11 Ad-hoc Mode] or [Infrastructure Mode]   [OK]

• [Ad-hoc Channel]

Select an Ad-hoc channel.
Select a channel   [OK]

Select an Ad-hoc channel according to the IEEE 802.11 standard you are using.

• When using IEEE 802.11 b/g:

Channels 1–11

• When using IEEE 802.11 a:

Channels 36, 40, 44, and 48

• When using IEEE 802.11 n:

Channels 1–11, 36, 40, 44, and 48

• The transmission mode of the wireless LAN can also be set using Web Image Monitor. For

details, see Web Image Monitor Help

Setting the SSID

1.

Press the [User Tools] key, and then display the [Wireless LAN] screen.

[System Settings]   [Interface Settings]   [Wireless LAN]

2.

Enter the SSID.

[SSID Setting]   [Enter SSID]   Enter the SSID   [OK]   [OK]

• The SSID can also be set using Web Image Monitor. For details, see Web Image Monitor

Help.

2. Setting Up the Printer

96

midas-p3_com_operating_instructions_gb_00198499_eng.xml

Draft 2016/01/18

Summary of Contents for PRSPC342DN1

























































































































Reviews:

No comments