manualshive.com logo in svg

Ricoh PRSPC342DN1, User Manual, Page: 19 / 120

Share
Download
Ricoh PRSPC342DN1 User Manual Download Page 19

To attach this option, see page 66 "Installing SD Card Options".

3. Hard disk

Allows you to store documents to be printed.
To attach this option, see page 59 "Installing the Hard Disk".

• If you want to use two or more SD cards that can be inserted in the same slot, contact your sales or

service representative.

Guide to the Names and Functions of the Control Panel

This illustration shows the control panel of the printer.

2

3

4

13

12

11

10

9

8

6 7

5

1

DPP299

1. [Job Reset] key

Press to cancel the current print job.

2. [Switch Functions] key

Press this key to switch between the operation screen of the printer function and the function screens of the
extended features currently in use.

3. Display

Displays current printer status and error messages.
Entering energy saver mode turns off the back light. For details about energy saver mode, see page 74
"Saving Energy".

4. Scroll keys

Press these keys to move the cursor in each direction.

Guide to Names and Functions of Components

midas-p3_com_operating_instructions_gb_00198424_eng.xml

19

Draft 2016/01/18

Summary of Contents for PRSPC342DN1

























































































































Reviews:

No comments