Ricoh PRSPC342DN1 User Manual Download Page 102

Page: 102 / 120

Interface Information

Displays the interface information.

Virtual Printer

Displays whether the virtual printer is active or inactive.

System Reference

• Machine ID

Displays the serial number assigned to the board by its manufacturer.

• Total Memory

Displays the total amount of memory (SDRAM) installed on the printer.

• Total Counter

Displays the total number of pages printed by the printer to date.

• Firmware Version

• Printer

Displays the version number of the printer firmware.

• System

Displays the version number of the system firmware.

• Engine

Displays the version number of the printer engine.

• LCDC

Displays the version number of the panel display.

• NIB

Displays the version number of the Network interface.

• Device Connection

This item(s) appears when the device option(s) is installed.

• Printer Language

Displays the version number of the printer language.

• Attached Equipment

Displays the installed optional equipments.

• Consumption Status

Displays the supply status.

Paper Input

Displays settings made under Tray Paper Settings menu.

2. Setting Up the Printer

102

midas-p3_com_operating_instructions_gb_00198508_eng.xml

Draft 2016/01/18

Summary of Contents for PRSPC342DN1

























































































































Search results

Summary of Contents for PRSPC342DN1

Reviews:

Ricoh PRSPC342DN1, User Manual, Page: 102 / 120

Search results

Summary of Contents for PRSPC342DN1

Reviews: