manualshive.com logo in svg

Ricoh PRSPC342DN1, User Manual, Page: 16 / 120

Share
Download
Ricoh PRSPC342DN1 User Manual Download Page 16

Exterior: Rear view

DPP002

1

2

3

10

9

8

7
6

5
4

1. Memory cover

Remove this cover to install the optional hard disk.

2. Power connector

Connect the power cord to the printer. Insert the other end into an electrical outlet.

3. Rear cover

Raise this cover and attach the paper tray cover when loading paper larger than A4 or letter size paper.

4. Cable cover

Remove this cover to install the optional interface units and the SD card, and to connect various cables.

5. Front cover open lever

Pull this lever to open the front cover.

6. USB port A

Connect external devices such as a digital camera, a card authentication device, etc.

7. USB port B

Use a USB cable to connect the printer to a computer.

8. Ethernet port

Use a network interface cable to connect the printer to a network.

9. Optional interface board slot

Optional interface boards can be inserted.
Insert an optional wireless LAN interface board, IEEE 1284 interface board, or USB device server.

10. Expansion card slots

Remove the cover to install SD cards.

1. Getting Started

16

midas-p3_com_operating_instructions_gb_00198424_eng.xml

Draft 2016/01/18

Summary of Contents for PRSPC342DN1

























































































































Reviews:

No comments