manualshive.com logo in svg

Ricoh PRSPC342DN1, User Manual, Page: 23 / 120

Share
Download
Ricoh PRSPC342DN1 User Manual Download Page 23

1

2

3

Touch the display panel
Press the [Home] key

CZV301

1. [Home] screen

Displays function and shortcut icons. For details, see page 24 "Using the [Home] screen".
The [Home] screen is set as the default screen when the printer is turned on. You can change this default
setting under Function Priority. See page 286 "System Settings".

2. [Printer] screen

Displays operation status, messages, and function menus. For details, see page 25 "Using the [Printer]
screen".

3. [Supplies Info] screen

Checks the printer status, such as toner, paper, and waste toner levels.

• After finishing a job, the printer waits a specified length of time, then restores its settings to the

default values specified under Function Priority. This function is called "System Reset". For the
procedure for specifying default settings under Function Priority, see page 286 "System Settings".

• To change the length of time that the printer waits before restoring its settings to their default values,

use the Printer Auto Reset Timer setting. See page 286 "System Settings".

Guide to Names and Functions of Components

midas-p3_com_operating_instructions_gb_00198424_eng.xml

23

Draft 2016/01/18

Summary of Contents for PRSPC342DN1

























































































































Reviews:

No comments