manualshive.com logo in svg

Ricoh PRSPC342DN1, User Manual, Page: 82 / 120

Share
Download
Ricoh PRSPC342DN1 User Manual Download Page 82

3.

Connect one end of the USB interface device to the printer's USB port A.

If you are using a USB interface cable, connect the other end to a device such as a card
authentication device.

DPP039

4.

Attach the cable cover.

DPP029

• This printer does not come with a USB interface cable. Make sure you purchase the appropriate

cable for the printer (connector shape) and the device.

• Use a five meter (16.4 foot) or shorter cable that supports USB Host Interface.
• Check the type of the plug before connecting.
• Do not pull the connected cable forcefully. Make sure the cable is properly connected. Otherwise,

it might become disconnected or somebody might trip on it.

• Using a cable with some connectors or converters may result in an improper connection.

Digital camera connection

This printer supports direct printing, which allows you to print images taken with a digital camera by
connecting the camera directly to the printer. The following explains how to connect the printer to a
digital camera.

2. Setting Up the Printer

82

midas-p3_com_operating_instructions_gb_00198490_eng.xml

Draft 2016/01/18

Summary of Contents for PRSPC342DN1

























































































































Reviews:

No comments