manualshive.com logo in svg

Ricoh PRSPC342DN1, User Manual, Page: 28 / 120

Share
Download
Ricoh PRSPC342DN1 User Manual Download Page 28

Using the Screen on the Control Panel

This function is available for SP C342DN only.
This section explains how to use the screen on the control panel.

Changing Modes by Pressing the Icons

Switching screen patterns

This section explains how to switch to the simple screen and the keys that are displayed.
When you press the [Simple Screen] key, the screen changes from the initial display to the simple
screen.
Only the main functions are shown on the simple screen.
Larger letters and keys are displayed, making operations easier.

1.

Press the [Simple Screen] key.

CZV007

This illustration shows the simple display of the [Printer] screen.

To increase the screen contrast, press the [Simple Screen] key again.

• To return to the initial display from the high contrast screen, press the [Simple Screen] key again.

1. Getting Started

28

midas-p3_com_operating_instructions_gb_00198432_eng.xml

Draft 2016/01/18

Summary of Contents for PRSPC342DN1

























































































































Reviews:

No comments