Ricoh M156, Service Manual

Page: 94 / 169

Service Program Mode
SM 5-7 M156/M157/M176/M177
S
er
vi
c
e T
ab
le
s
Engine Maintenance
Registration
Horiz. Tray1
Adjusts the horizontal registration for tray 1. If the
machine settings are reset to the factory defaults,
this value does not change.
[-40.0 to 40.0 / 4.0 (Default) / 0.1 mm/step]
Vert. Tray1 Plain
Adjusts the vertical registration of plain paper for
tray1. If the machine settings are reset to the
factory defaults, this value does not change.
[-40.0 to 40.0 / 12.0 (Default) / 0.1 mm/step]
Vert. Tray1 Thick
Adjusts the vertical registration of thick paper for
tray 1. If the machine settings are reset to the
factory defaults, this value does not change.
[-40.0 to 40.0 / 12.0 (Default) / 0.1 mm/step]
Vert. Tray1 Thin
Adjusts the vertical registration of thin paper for
tray 1. If the machine settings are reset to the
factory defaults, this value does not change.
[-40.0 to 40.0 / 12.0 (Default) / 0.1 mm/step]
Horiz Bypass tray
Adjusts the horizontal registration for the bypass
tray. If the machine settings are reset to the
factory defaults, this value does not change.
[-40.0 to 40.0 / -2.0 (Default) / 0.1 mm/step]
Vert Bypass Plain
Adjusts the vertical registration of plain paper for
the bypass tray. If the machine settings are reset
to the factory defaults, this value does not
change.
[-40.0 to 40.0 / 12.0 (Default) / 0.1 mm/step]
Vert Bypass Thick
Adjusts the vertical registration of thick paper for
the bypass tray. If the machine settings are reset
to the factory defaults, this value does not
change.
[-40.0 to 40.0 / 12.0 (Default) / 0.1 mm/step]