Ricoh M156, Service Manual

Page: 163 / 169

Overview
SM Appendix 2-9 M156/M157/M176/M177
Er
ro
r M
e
s
s
a
g
e
s
Message Causes Solutions
TX Comm. Error A transmission error occurred,
and the fax could not be
transmitted correctly.
If the [Auto Redial] setting is enabled,
the machine will redial the number
and try again. If all attempts fail, or if
the machine is in Immediate
Transmission mode, the fax will not
be transmitted. Try the operation
again.
2.1.2 FAX ERROR CODE
This section describes the dial, transmission (TX), and reception (RX) error codes that are printed
on the TX Report/Activity Report.
Error codes consist of six hexadecimal digits (0-5).
Digit 5 indicates Fax/Internet Fax and TX/RX.
Digit 5 (far left) TX or RX
1 xxxxx
TX (Fax)
2 xxxxx RX (Fax)
3 xxxxx TX (Internet Fax)
4 xxxxx RX (Internet Fax)
Fax Error Code Structure
Digit 4 Coding (MH/MR/MMR/JBIG)
x 1 xxxx MH
x 2 xxxx
MR
x 3 xxxx MMR
x 4 xxxx JBIG