Ricoh M052 Service Manual Download Page 454

Page: 454 / 661

Service Call Conditions

M052/M053/M054 6-28

SC9xx: Others

900

Electrical total counter error

The total count contains something

that is not a number.

NVRAM incorrect type

NVRAM

defective

NVRAM data scrambled

Unexpected

error

from

external source

920 D

Printer

Error

An internal application error was

detected and operation cannot

continue.

Software

defective

Insufficient

memory

921 B

Printer error 2

When the application started, the

necessary font was not on the SD

card.

Font not on the SD card

990

Software performance error

The software attempted to perform an unexpected operation due to: 1)

software bug, 2) incorrect internal parameter, 3) insufficient working

memory.

Turn the machine power off/on

Reinstall the controller and/or main firmware

Note

: When this SC occurs, the file name, address, and data will be

stored in NVRAM. This information can be checked by using SP7-403.

Note the above data and the situation in which this SC occurs. Then report

the data and conditions to your technical control center.

Summary of Contents for M052






















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for M052

Reviews:

Related manuals for M052

Brands by name

Popular brands

Ricoh M052, Service Manual

Search results

Summary of Contents for M052

Reviews:

Related manuals for M052

Brands by name

Popular brands