Ricoh M052, Service Manual

Page: 394 / 661

Printer Service Mode
M052/M053/M054 5-178 SM
1001 Bit Switch
005 Bit Switch 5 0 1
bit 0
Show "Collate Type", "Staple Type" and
"Punch Type" buttons on the operation
panel.
0: Disable 1: Enable
If enabled, users will be able to configure a Collate Type, Staple Type, and
Punch Type from the operation panel. The available Types will depend on
the device and configured options.
After enabling this BitSw, the settings will appear under:
"User Tools > Printer Features > System"
bit 1
Multiple copies if a paper size or type
mismatch occurs
0: Disable
(Single
copy)
1: Enable
(Multiple copy)
If a paper size or type mismatch occurs during the printing of multiple
copies, only a single copy is output by default. Using this BitSw, the device
can be configured to print all copies even if a paper mismatch occurs.
bit 2 Prevent SDK applications from altering
the contents of a job.
0: Disable 1: Enable
If this BitSw is enabled, SDK applications will not be able to alter print
data. This is achieved by preventing SDK applications from accessing a
module called the "GPS Filter".
Note: The main purpose of this BitSw is for troubleshooting the effects of
SDK applications on data.
bit 3 [PS] PS Criteria 0: Pattern3 1: Pattern1
Change the number of PS criterion used by the PS interpreter to
determine whether a job is PS data or not.
Pattern3: includes most PS commands.
Pattern1: A small number of PS tags and headers
bit 4 Increase max number of the stored jobs
to 1000 jobs.
0: Disable
(100)
1: Enable
(1000)