Ricoh M052, Service Manual

Page: 282 / 661

System SP5-xxx
M052/M053/M054 5-66 SM
164
Line Connecting
This SP sets the connection conditions for the customer. This setting
dedicates the line to RCG-M only, or sets the line for sharing between RCG-M
and a fax unit.
[0 to 1 / 0 / 1 /step]
0: Sharing Fax
1: No Sharing Fax
ƒ
If this setting is changed, the copier must be cycled off and on.
ƒ
SP5816 187 determines whether the off-hook button can be used to
interrupt a RCG-M transmission in progress to open the line for fax
transaction.
173 Modem Serial Number
This SP displays the serial number registered for
the RCG -M.
174
Retransmission Limit
Normally, it is best to allow unlimited time for certification and ID2 update
requests, and for the notification that the certification has been completed.
However, RCG -M generates charges based on transmission time for the
customer, so a limit is placed upon the time allowed for these transactions.
If these transactions cannot be completed within the allowed time, do this SP
to cancel the time restriction.
187
FAX TX Priority -
This SP determines whether pushing the off-hook button will interrupt a
RCG-M transmission in progress to open the line for fax transaction. This SP
can be used only if SP5816 164 is set to "0".
[0 or 1/ 0 / - ]
0: Disable, 1: Enable