Ricoh M052, Service Manual

Page: 280 / 661

System SP5-xxx
M052/M053/M054 5-64 SM
153
Selection Dial/Push
This SP displays the classification (tone or pulse) of the telephone line to the
access point for embedded RCG-M. The number displayed (0 or 1) is the
result of the execution of SP5816-151. However, this setting can also be
changed manually.
[0 or 1 / 0 / 1 /step]
0: Tone Dialing Phone
1: Pulse Dialing Phone
Inside Japan "2" may also be displayed:
0: Tone Dialing Phone
1: Pulse Dialing Phone 10PPS
2: Pulse Dialing Phone 20PPS
154
Outside Line/Outgoing Number
The SP sets the number that switches to PSTN for the outside connection for
embedded RCG-M in a system that employs a PBX (internal line).
ƒ
If the execution of SP5816-151 has succeeded and embedded RCG-M
has connected to the external line, this SP display is completely blank.
ƒ
If embedded RCG-M has connected to an internal line, then the number
of the connection to the external line is displayed.
ƒ
If embedded RCG-M has connected to an external line, a comma is
displayed with the number. The comma is inserted for a 2 sec. pause.
ƒ
The number setting for the external line can be entered manually
(including commas).
156
Dial Up User Name
Use this SP to set a user name for access to remote dial up. Follow these
rules when setting a user name:
ƒ
Name length: Up to 32 characters
ƒ
Spaces and # allowed but the entire entry must be enclosed by double
quotation marks (").