Ricoh M052, Service Manual

Page: 253 / 661

System SP5-xxx
SM 5-37 M052/M053/M054
Syste
m
Ma
in
te
na
n
ce
Ref
eren
ce
5120
[Mode Clear Opt. Counter
Removal]
*CTL
[ 0 : Yes (removed) / 1: Standby (installed but
not used)/ 2: No (not removed)]
001
This program updates the information on the optional counter. When you install
or remove an optional counter, check the settings.
5121 [Counter Up Timing] *CTL [ 0: Feed / 1: Exit]
001
This program specifies when the counter goes up. The settings refer to "paper
feed" and "paper exit" respectively.
5127 [APS Mode] *CTL [ 0 : Not disabled/ 1: Disabled]
001 This program disables the APS.
5162 [App. Switch Method] *CTL [ 0 : Soft Key Set/ 1: Hard Key Set]
001 This program specifies the switch that selects an application program.
5167
[Fax Printing Mode at Optional]
Enables or disables the automatic print out without an accounting device. This
SP is used when the receiving fax is accounted by an external accounting
device.
001
Fax Printing Mode at
Optional Counter Off
*CTL
[0 or 1 / 0 / - ]
0: Automatic printing
1: No automatic printing