Ricoh LANIER MP 301SP Service Manual Download Page 75

Page: 75 / 553

Controller Options

2-43

D127/D128

Ins

lla

Clearing the NVRAM

When replacing the controller board for a model in which the HDD encryption unit has been

installed and a customer has lost the encryption key, clearing the NVRAM is required to recover

the HDD encryption unit.

1. Prepare an SD card which is initialized.

2. Make the "restore_key" folder in the SD card.

3. Make an "nvram_key.txt" file in the "restore_key" folder in the SD card.

4. Input "nvclear" into the "nvram_key.txt" file.

5. Turn on the main power switch.

6. Confirm that the prompt on the LCD tells you to install the SD card (storing the encryption

key) in the machine.

7. Turn off the main power switch.

8. Insert the SD card that contains "nvclear" into slot 1.

9. Turn on the main power switch, and the machine automatically restores the encryption key in

the flash memory on the controller board.

10. Turn off the main power switch after the machine has returned to normal status.

11. Remove the SD card from slot 1.

12. Turn on the main power switch.

13. Initialize the NVRAM (SP5801-001) and HDD unit (SP5832-001) with SP mode.

14. The user must enable the HDD encryption unit with a user tool.

Summary of Contents for LANIER MP 301SP










































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LANIER MP 301SP

Reviews:

Brands by name

Popular brands

Ricoh LANIER MP 301SP, Service Manual

Search results

Summary of Contents for LANIER MP 301SP

Reviews:

Brands by name

Popular brands