Ricoh LANIER MP 301SP, Service Manual

Page: 323 / 553

System Service Mode
SM Appendix 3-67 D127/D128
A
ppe
n
dix
:
SP
Mo
d
e
T
ab
les
103
Primary srv port number [1 to 65535 / 80 / 1 /step]
Normally, the value is determined automatically on CS I/O device registration.
104
Primary srv URL path [0 to 16 letter(s)]
Normally, the value is determined automatically on CS I/O device registration.
111
Secondary srv IP address
[000.000.000.000 to 255.255.255.255]
Default: 000.000.000.000
Normally, the value is determined automatically on CS I/O device registration.
Only IP address designation is valid.
112
Secondary srv scheme [Max 6 letter(s)]
Normally, the value is determined automatically on CS I/O device registration.
113
Secondary srv port number [1 to 65535 / 80 / 1 /step]
Normally, the value is determined automatically on CS I/O device registration.
114
Secondary srv URL path [0 to 16 letter(s)]
Normally, the value is determined automatically on CS I/O device registration.
120
Default Reso Rate Switch [0 or 1 / 0 / 1 /step]
Normally, the value is determined automatically on CS I/O device registration.
122
Reso: Copy (Mono) [0 to 255 / 0 / 1 /step]
The value affects the output resolution. See the list below.
Normally, the value is determined automatically on CS I/O device registration.
*When the resolution cannot be output for the machine specification limit,
output is done by the nearest rate within the limitation.
Value Resolution
0 600dpi
1 400dpi
2 300dpi
3 200dpi