Ricoh LANIER MP 301SP, Service Manual

Page: 421 / 553

Fax Error Codes
SM Appendix 4-3 D127/D128
A
ppe
n
dix
:
Fa
x
T
rou
ble
-
S
h
oo
ting
Gu
ide
Code Meaning Suggested Cause/Action
0-07
No post-message
response from the other
end after a page was sent

Check the line connection.

Replace the NCU or FCU.

The other end may have jammed or run out of
paper.

The other end user may have disconnected
the call.

Check for a bad line.

The other end may be defective; try sending to
another machine.
0-08
The other end sent RTN or
PIN after receiving a page,
because there were too
many errors

Check the line connection.

Replace the NCU or FCU.

The other end may have jammed, or run out of
paper or memory space.

Try adjusting the tx level and/or cable
equalizer settings.

The other end may have a defective
modem/NCU/FCU; try sending to another
machine.

Check for line problems and noise.
Cross reference

Tx level - NCU Parameter 01 (PSTN)

Cable equalizer - G3 Switch 07 (PSTN)

Dedicated Tx parameters in Service Program
Mode
0-14
Non-standard post
message response code
received

Incompatible or defective remote terminal; try
sending to another machine.

Noisy line: resend.

Try adjusting the tx level and/or cable
equalizer settings.

Replace the NCU or FCU.
Cross reference
See error code 0-08.