Ricoh LANIER MP 301SP, Service Manual

Page: 438 / 553

Fax Error Codes
D127/D128 4-20 SM Appendix
Code Meaning Suggested Cause/Action
22-01
Memory overflow while
receiving

Wait for the files in the queue to be sent.

Delete unnecessary files from memory.

Transfer the substitute reception files to an
another fax machine, if the machine’s printer is
busy or out of order.

Add an optional SAF memory card or hard
disk.
22-02
Tx or rx job stalled due to
line disconnection at the
other end

The job started normally but did not finish
normally; data may or may not have been
received fully.

Restart the machine.
22-04
The machine cannot store
received data in the SAF

Update the ROM

Replace the FCU.
22-05
No G3 parameter
confirmation answer

Defective FCU board or firmware.
23-00
Data read timeout during
construction

Restart the machine.

Replace the FCU.
25-00
The machine software
resets itself after a fatal
transmission error
occurred

Update the ROM

Replace the FCU.
F0-xx V.34 modem error

Replace the FCU.
F6-xx SG3 modem error

Update the SG3 modem ROM.

Replace the SG3 board.

Check for line noise or other line problems.

Try communicating another V.8/V.34 fax.