Ricoh LANIER MP 301SP, Service Manual

Page: 429 / 553

Fax Error Codes
SM Appendix 4-11 D127/D128
A
ppe
n
dix
:
Fa
x
T
rou
ble
-
S
h
oo
ting
Gu
ide
Code Meaning Suggested Cause/Action
6-09 G3 ECM - ERR received

Check for a noisy line.

Adjust the tx levels of the communicating
machines.

See code 6-05.
6-10
G3 ECM - error frames still
received at the other end
after all communication
attempts at 2400 bps

Check for line noise.

Adjust the tx level (use NCU parameter 01 or
the dedicated tx parameter for that address).

Check the line connection.

Defective remote terminal.
6-21
V.21 flag detected during
high speed modem
communication

The other terminal may be defective or
incompatible.
6-22
The machine resets the
sequence because of an
abnormal handshake in the
V.34 control channel

Check for line noise.

If the same error occurs frequently, replace the
FCU.

Defective remote terminal.
6-99
V.21 signal not stopped
within 6 s

Replace the FCU.
13-17
SIP user name registration
error

Double registration of the SIP user name.

Capacity for user-name registration in the SIP
server is not sufficient.
13-18 SIP server access error

Incorrect initial setting for the SIP server.

Defective SIP server.
13-24
SIP authentication
password error

The input password for the authentication
does not match the password registered in the
SIP server.
14-00 SMTP Send Error

Error occurred during sending to the SMTP
server. Occurs for any error other than 14-01
to 16. For example, the mail address of the
system administrator is not registered.