Ricoh LANIER MP 301SP Service Manual Download Page 44

Page: 44 / 553

Paper Tray Unit (D661)

D127/D128

2-12

2.4 PAPER TRAY UNIT (D661)

2.4.1 ACCESSORY CHECK

Confirm that you have these accessories.

Description

Q'ty

1. Paper-size decals

1 sheet

2. Installation Procedure (for service person)

2.4.2 INSTALLATION PROCEDURE



1. Turn off the main switch of the copier and unplug the power cord before you start the

installation procedure.



2. You need two or more persons to lift the copier. The copier is highly unstable when

lifted by one person, and may cause human injury or property damage.



3. Do not lift the copier with the paper feed unit installed. The handle and grips may be

damaged.

1. Remove the tapes [A].

Summary of Contents for LANIER MP 301SP










































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LANIER MP 301SP

Reviews:

Brands by name

Popular brands

Ricoh LANIER MP 301SP, Service Manual

Search results

Summary of Contents for LANIER MP 301SP

Reviews:

Brands by name

Popular brands