Ricoh LANIER MP 301SP Service Manual Download Page 211

Page: 211 / 553

Card Save Function

6-45

D127/D128

rou

–

hoo

6.3 CARD SAVE FUNCTION

6.3.1 OVERVIEW

Card Save:



The Card Save function is used to save print jobs received by the printer on an SD card with

no print output. Card Save mode is toggled using printer Bit Switch #1 bit number 4. Card

Save will remain enabled until the SD card becomes full, or until all file names have been

used.



Captures are stored on the SD card in the folder /prt/cardsave. File names are assigned

sequentially from PRT00000.prn to PRT99999.prn. An additional file PRT.CTL will be created.

This file contains a list of all files created on the card by the card save function.



Previously stored files on the SD card can be overwritten or left intact. Card Save SD has

"Add" and "New" menu items.



Card Save (Add):

Appends files to the SD Card. Does not overwrite existing files. If the

card becomes full or if all file names are used, an error will be displayed on the operation

panel. Subsequent jobs will not be stored.



Card Save (New):

Overwrites files in the card's /prt/cardsave directory.

Limitation:



Card Save cannot be used with PJL Status Readback commands. PJL Status Readbacks will

not work. In addition they will cause the Card Save to fail.

6.3.2 PROCEDURE

1. Turn the main power switch OFF.

2. Insert the SD card into the service slot of the controller board. Then turn the power ON.



To determine which slot is the service slot, please see the service manual.

3. Enter SP mode.

4. Select "Printer SP".

5. Select "SP1-001-001".

Summary of Contents for LANIER MP 301SP










































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LANIER MP 301SP

Reviews:

Brands by name

Popular brands

Ricoh LANIER MP 301SP, Service Manual

Search results

Summary of Contents for LANIER MP 301SP

Reviews:

Brands by name

Popular brands