Ricoh LANIER MP 301SP, Service Manual

Page: 427 / 553

Fax Error Codes
SM Appendix 4-9 D127/D128
A
ppe
n
dix
:
Fa
x
T
rou
ble
-
S
h
oo
ting
Gu
ide
Code Meaning Suggested Cause/Action
2-28
JBIG data reconstruction
error (Timeout)
2-29
JBIG trailing edge maker
error

FCU defective

Check the destination device.
2-50
The machine resets itself
for a fatal FCU system
error

If this is frequent, update the ROM, or replace
the FCU.
2-51
The machine resets itself
because of a fatal
communication error

If this is frequent, update the ROM, or replace
the FCU.
2-53
Snd msg() in the manual
task is an error because
the mailbox for the
operation task is full.

The user did the same operation many times,
and this gave too much load to the machine.
4-01 Line current was cut

Check the line connector.

Check for line problems.

Replace the FCU or the NCU.
4-10
Communication failed
because of an ID Code
mismatch (Closed
Network) or Tel. No./CSI
mismatch (Protection
against Wrong
Connections)

Get the ID Codes the same and/or the CSIs
programmed correctly, then resend.

The machine at the other end may be
defective.
5-10 DCR timer expired

Replace the FCU.
5-20
Storage impossible
because of a lack of
memory

Temporary memory shortage.

Test the SAF memory.
5-21 Memory overflow