Ricoh LANIER MP 301SP, Service Manual

Page: 312 / 553

System Service Mode
D127/D128 3-56 SM Appendix
185 User Permit: Screen Settings
201 JPEG Quality
202 Number of Common Bookmark
204 Vertical Scroll Bar display mode
0: Always display (Default)
1: Display when pressing “Program Key
205
Confirmation dialog display
setting
NOTE:
-
If enabled, the “Page change
confirmation dialog” is displayed when
the user moves from the current page
to a different one.
-
The “SSL certificate confirmation
dialog” is displayed when an
SSL-related problem occurs.
-
If the customer is using an internal
(original) Web application, i.e. a fully
trusted application, this SP can be set
to “2” (do not display either dialog).
Value Page change
confirmation
dialog
SSL certificate
confirmation
dialog
0 (Default) Display Display
1 Not display Display
2 Not Display Not display
3 Display Not display
206 Displayed but it should not be used (Not for field use).
5793
ECS Debug SW
DFU
5794
Browser Debug
DFU
5801
[Memory Clear]
Before executing any of these SP codes, print an SMC Report.
001
All Clear
Initializes items SP5801-002 to -014 below.
Turn the main power switch off and on after executing this SP.
002
Engine - -
Clears the engine settings.
003
SCS - -
Clears the system settings.
004
IMH Memory Clr
Initializes the image file system.
(IMH: Image Memory Handler)
005
MCS -
Clears MCS data. DFU
006
Copier application
Clears the copier application settings.
IMPORTANT: Only use these SP Modes with Browser
Version 1.04.0 or newer, EXJS version 1.03.00 or
newer, and Specification 2.03 or newer.
⇒
Rev. 08/24/2012