Ricoh G176 Page 213 Service Manual Download

Page: 213 / 294

Printing Process

SM 6-11

G176/G177/G176L

Det

ails

6.3.5 DEVELOPMENT

Toner Supply and Development

1. Toner tank

2. Agitator

3. Pre-doctor blade

4. Development roller

5. Drum

6. Doctor blade

7. Reverse roller

8. Developer tank

Toner Supply

The agitator [2] mixes toner and sends it to the development roller.

Development Unit

This machine uses a one-roller development system. The high voltage supply applies

-700V to the development roller.

When the user removes the developer seal, the developer falls and the magnetic reverse

roller [7] mixes the developer.

This machine does not use a TD sensor or ID sensor to control toner density. The

pre-doctor blade [3] and the doctor blade [6] control the toner density.

Summary of Contents for G176







































































































































































































































































































Search results

Summary of Contents for G176

Reviews:

Related manuals for G176

Brands by name

Popular brands

Ricoh G176, Service Manual

Search results

Summary of Contents for G176

Reviews:

Related manuals for G176

Brands by name

Popular brands