Ricoh G176, Service Manual

Page: 105 / 294

Printer Controller Service Mode
SM 5-3 G176/G177/G176L
Service
Ta
bles
5.2 PRINTER CONTROLLER SERVICE MODE
5.2.1 SERVICE MODE MENU ("1. SERVICE MENU")
SPMode Description Function
1001 Bit switch Adjusts bit switch settings.
1003 Clear Setting Initializes settings in the “System” menu of the user mode.
1004
Print
summary
Prints the service summary sheet (a summary of all the
controller settings).
1005 Disp Version Displays the version of the controller firmware.
5.2.2 BIT SWITCH PROGRAMMING
1. Enter the sp mode, select “Service Menu”, then press [Enter] twice.
2. Select the desired bit switch, then press [Enter].
ƒ [
#
] [
%
]: Move to the next switch.
3. Adjust the bit switch using the following keys.
ƒ [
#
] [
%
]: Move to the next bit.
ƒ [Escape]: Exit without saving changes.
ƒ [Enter]: Exit and save changes.
ƒ
The left digit on the display is bit 7 and the right digit is bit 0.
4. Press [Enter] to save changes and exit.
Settings Bit
Sw 8
Title Explanation
0 1 Default
6 [PS]: Orientation
Auto Detect
Function
Automatically chooses page orientations of
PostScript jobs (Landscape or Portrait)
based on the content.
Enabled Disabled 0
7 [PDF]: Orientation
Auto Detect
Function
Automatically chooses page orientations of
PDF jobs (Landscape or Portrait) based on
the content.
Enabled Disabled 0
•
To access Orientation Auto Detect, update the Printer firmware to v1.09 or later .
Rev. 10/2008
⇒