Ricoh G176, Service Manual

Page: 88 / 294

Error Messages
G176/G177/G176L 4-18 SM
4.2 ERROR MESSAGES
Here is a list of common error messages, a description of the problems, and their solutions.
This is just a reference information.
1st/2nd Message Problem/Solution
Cannot check, Signal in Ad hoc Disable Ad hoc in the Comm. Mode settings.
Cannot duplex Tray #/ Press
Form Feed or reset the Job
Duplexing prohibited from specified tray.
Cancel duplex mode
Press [Form Feed] or [Job Reset].
Cannot install from this SD card
SD card contains a DOS (Data Overwrite Security)
program that has already been installed for another
machine.
ƒ Contact system administrator.
Certificate auto renewal failed
Automatic certificate renewal has failed.
ƒ
Call your service provider.
Change Setting
Tray #/Paper Size:, Paper Type:
The paper size/paper type settings in the application
program and printer driver do not match.
ƒ Change the paper type on the paper type setting
menu on the machine operation panel
ƒ Push [Form Feed]
ƒ Cancel the print job.
Change Setting
Tray #/ Paper Size:, Paper Type:
The paper size/paper type settings in the application
program and printer driver do not match.
Do one of the following:
ƒ Load the tray with the correct paper
ƒ Change the paper size using the dial or the
special paper size setting menu on the operation
panel.
ƒ Push [Form Feed]
ƒ Cancel the print job.