Ricoh G176, Service Manual

Page: 57 / 294

Fusing
SM 3-17 G176/G177/G176L
R
ep
la
cem
en
t
and
Adjus
tm
ent
[A] Fusing Lamp ( x2)
ƒ The colored cable must be at the hot roller gear side.
[B] Guide plate (3 hooks)
[C] Hot roller strippers (1 spring each)
[D] Hot roller (2 C-rings, 1 gear, 2 bushings)
ƒ Before removing the hot roller from the unit, remove the gear and the pin first,
ƒ Use a small screwdriver to separate the guide plate from the unit.
ƒ Before installing the new hot roller, peel off 3 cm (1 inch) from both ends of the
protective sheet on the new hot roller. Be sure to remove the remaining paper
before starting the machine.