Ricoh G176, Service Manual

Page: 173 / 294

Printer Engine Service Mode
SM 5-71 G176/G177/G176L
Service
Ta
bles
SP8XXX: Data Log 2
The SPs in this group are prefixed with a letter that indicates the mode of operation. The
mode of operation is referred to as an ‘application’. Before reading the Group 8 Service
Tables, make sure that you understand what these prefixes mean.
Prefix Application What It Means
T: Total
Grand total of the items counted for all applications (C, F,
P, etc.).
P: Print
Totals (pages, jobs, etc.) executed for each application
when the job was not stored on the document server.
O: Other
Other applications (external network applications, etc.).
Refers to network applications such as Web Image
Monitor. Utilities developed with the SDK (Software
Development Kit) are also counted.
Group 8 SP codes are limited to 17 characters, forced by the necessity of displaying them
on the small LCDs of printers and faxes that also use these SPs.
ƒ All of the Group 8 SPs are reset with SP5 801 1 Memory All Clear.
8381 T:2-2-01
8384 P:2-2-01
8387 O:2-2-01
These SPs count the number of pages printed by the customer.
The counter for the application used for storing the pages
increments.
[0 to 9999999/0/1]
ƒ When the A3/DLT double count function is switched on with SP5104, 1 A3/DLT page is
counted as 2.
ƒ When several documents are merged for a print job, the number of pages stored are
counted for the application that stored them.
ƒ These counters are used primarily to calculate charges on use of the machine, so the
following pages are not counted as printed pages:
ƒ Blank pages in a duplex printing job.
ƒ
Reports printed to confirm counts.