Ricoh G176, Service Manual

Page: 71 / 294

Service Call Conditions
SM 4-1 G176/G177/G176L
Tr
ouble
-
shooting
4. TROUBLESHOOTING
4.1 SERVICE CALL CONDITIONS
4.1.1 SUMMARY
There are 4 levels of service call conditions
Level Definition Reset Procedure
A
Fusing unit SCs shown on the
operation panel. The machine is
disabled. The user cannot reset the
SC.
1. Do SP5810 and press [#Enter].
2. When "execute" is displayed, press
[#Enter] again.
3. Press [Escape].
4. Turn the machine power off/on.
B
These SCs disable only the features
that use the defective item. The
user does not see these SCs in
usual conditions. But, they are
shown on the operation panel when
the defective feature is used.
Set the main power switch to “off” then
to “on”.
C
SCs that are not shown on the
operation panel. They are recorded
internally.
Recorded only.
D
These SCs are shown on the
operation panel. To reset these
SCs, turn the operation switch or
main power switch off and on.
These SCs are shown again if the
error occurs again.
Set the operation switch or the main
power switch to “off” then to “on”.