Ricoh G176, Service Manual

Page: 107 / 294

Printer Engine Service Mode
SM 5-5 G176/G177/G176L
Service
Ta
bles
Side to Side Reg Side-to-Side Registration
1002
Adjusts the printing side-to-side registration from the 1st paper feed station
using the trimming area pattern (SP2-902 No.12).
Push [
#
] or [
%
] to select the settings (plus or minus).
Specification: 0 ±2.0 mm.
1002 001 Cassette
1002 002 Multi Tray
1002 003 Duplex Tray
1002 004 Bypass Tray
1002 005 Duplex
[-40 to +40/ 0 /1]
Regist sag Registration Buckle Adjustment
1003
Adjusts the relay clutch timing at registration. Relay clutch timing
determines the amount of paper buckle at registration. (A “+” setting causes
more buckling.)
1003 001 Cassette [–8 mm to+8 mm/ 0 /2 mm step]
1003 002 Multi Tray
[–8 mm to+8 mm/ 0 /2 mm step]
1003 003 Duplex Tray [–8 mm to+8 mm/ 0 /2 mm step]
Fusing control Normal, Phase control
1104
Use phase control if the room lights flicker when the fusing lamp starts.
Off: Normal
On: Phase Control
Defaults : NA Off (Normal), EU On (Phase Control)