Ricoh G176 Service Manual Download

Page: 234 / 294

Image Fusing and Paper Exit

G176/G177/G176L 6-32

6.5.8 ENERGY SAVER MODE

When the machine is not being used, the energy saver feature reduces power consumption

by switching off the fusing lamp.

Entering Energy Saver Mode

Energy saver mode starts after the machine has been idle for a specified time. The

operator can set the time on the System menu. ([Menu]> "System"]. Several settings are

available: Off, 1, 5, 15, 30, 45, 60 min (Default: 5 min.)

When the machine is in energy saver mode, the CPU turns off the fusing lamp. The +5VE

(power enabled in energy saver mode) line is active in energy saver mode; however, the

+24V and +5V lines are not active.

Leaving Energy Saver Mode

The machine leaves energy saver mode when one of the following events occur:

Print command received from the PC

Any cover opened and closed

Any operation panel keys pressed

Summary of Contents for G176







































































































































































































































































































Search results

Summary of Contents for G176

Reviews:

Related manuals for G176

Brands by name

Popular brands

Ricoh G176, Service Manual

Search results

Summary of Contents for G176

Reviews:

Related manuals for G176

Brands by name

Popular brands