Ricoh G176 Page 189 Service Manual Download

Page: 189 / 294

NVRAM Data Upload/Download

SM 5-87

G176/G177/G176L

Service

bles

3. Remove the SD card slot cover.

4. Insert the SD card into Slot 1.

5. Turn on the main power switch.

6. Enter the SP mode and do SP5825 (NVRAM Download).

7. Push

[#Enter].

execute?

8. Push

[#Enter].

You will see "Processing". Then when you see "result=OK", the NVRAM data has been

downloaded successfully.

The machine cannot do the download if the file name SD card name is

different from the printer serial number.

9. Exit the SP mode.

10. Turn off the main power switch.

11. Remove the SD card.

12. Turn on the main power switch.

Summary of Contents for G176







































































































































































































































































































Search results

Summary of Contents for G176

Reviews:

Related manuals for G176

Brands by name

Popular brands

Ricoh G176, Service Manual

Search results

Summary of Contents for G176

Reviews:

Related manuals for G176

Brands by name

Popular brands