Ricoh G176, Service Manual

Page: 143 / 294

Printer Engine Service Mode
SM 5-41 G176/G177/G176L
Service
Ta
bles
Init All Set&Dir Initialize Address Book Settings & Directories
5846 046
The SP clears all the setting information managed in UCS and address
book information (local, delivery, LDAP) and restores these settings to their
default values. Use this SP to initial the account information (user codes
and passwords) for system managers and users as well.
ƒ Note:
ƒ
Be sure to cycle the machine off and on after you execute this SP code.
ƒ Once this SP has been executed, a message on the screens of
applications that use the address book will prompt users that the
address book is being updated. This prevents the machine from issuing
SC870.
ƒ
The machine initializes to determine if the address book is stored on the
HDD or on an SD card. In order for the machine to determine whether
to recognize an address book on the HDD or the SD card, the machine
must be cycled off and on once more to determine whether the machine
should recognize the address book on the HDD or the SD card.
Init Local Add B
5846 047
Clears all of the address information from the local address book of a
machine managed with UCS.
Init All Dir
5846 050
Clears everything (including users codes) in the directory information
managed by UCS. However, the accounts and passwords of the system
administrators are not deleted.