Ricoh FT4422, Operating Instructions Manual

Page: 93 / 108

WHERE TO PUT YOUR COPIER
Copier Environment
Your copier’s location should be carefully chosen because environmental
conditions greatly affect its performance.
Optimum environmental conditions
❐ Temperature: 10 - 30
°
C (50 - 86
°
F)
❐ Humidity: 15 - 90%
❐ A strong and level base.
❐ The copier must be level within 5 mm, 0.2" both front to rear and left to right.
❐
To avoid possible build-up of ozone, make sure to locate the copier in a large
well ventilated room that has an air turnover of more than 30 m
3
/hr/person.
Environments to avoid
❐ Locations exposed to direct sunlight or strong light (more than 1,500 lux.)
❐ Locations directly exposed to cool air from an air conditioner or heated air from
a heater. (Sudden temperature changes might cause condensation within the
copier.)
❐ Places where the copier might be subjected to frequent strong vibration.
❐ Dusty areas.
❐ Areas with corrosive gases.
❐ Places higher than 6,500 ft above sea level.
co-8
WHERE TO PUT YOUR COPIER
94