5
Reset the previous original and
press the Start key to resume the
previous run.
With the optional document feeder
1
Press the Interrupt key. The cop-
ier will stop the copy run and
store the present settings in the
memory. The original on the ex-
posure glass will exit from the
document feeder. The copier will
return to the ready condition.
2
Take the originals from the exit
stack.
3
Separately take the remaining
originals off the original table.
4
Make your copies.
5
After interrupt copying is com-
pleted, press the Interrupt key.
The copier will recall the previous
copy settings.
co-5
BASIC OPERATION
34
Summary of Contents for FT4422
