3
Make sure that the
o
Bypass
Feed indicator is lit. If it is not lit,
press the Select Paper Tray key
to select the bypass feed table.
❐
If the cassette is not set correctly, the
o
Bypass Feed indicator blinks and
you cannot select the bypass feed ta-
ble. In this case, set the cassette cor-
rectly.
4
Slide the paper guides to the pa-
per width and, if necessary,
swing out the extender to support
large size copy paper.
5
Lay the copy paper on the by-
pass feed table and Insert it until
the paper lightly touches the feed
roller inside.
❐
Do not shove paper into the bypass
feed table.
6
Press the Start key.
7
Repeat step
5
until your copying
is completed.
While the
o
Bypass Feed indi-
cator is lit, the copier is ready for
the next copy paper.
co-5
BASIC OPERATION
32
Summary of Contents for FT4422
