Ricoh FT4422, Operating Instructions Manual

Page: 56 / 108

Copier’s condition Action
Check Paper Size indicator
is lit.
You’ve selected an improper paper size. Copying is
impossible. Select the proper paper size.
You cannot use the bypass feed table in the Sort or
Stack mode. Select the cassette or the paper tray.
When making 2 one-sided copies from 2 facing pages:
➠
You cannot select the lengthwise
;
copy paper for
the book originals. Select sideways
:
copy paper.
➠
You cannot select Auto Paper Select.
Check Paper Size/Direction
indicator is blinking.
Original size or direction does not match the copy
paper size or direction.
➠
Select the proper paper size or direction.
When making copies in Auto Paper Select:
➠
There is no proper copy paper size or direction.
(copying is possible.) Select the proper paper size,
or press the Start key to continue copying.
➠
If you use translucent or transparent originals, or
originals with tags, the original size might not be
correctly detected. Do not use such originals.
The indicator of the Auto Image
Density indicator blinks.
Turn the main switch off and on. If this condition re-
occurs, call your service representative and explain the
problem.
The Manual Image Density
indicator blinks.
The Toner Saver indicator blinks.
Misfeeds occur frequently.
Is the right kind of paper in the paper tray or cassette?
➠
Paper size and weight must be within the
specifications for this copier.
Is folded, wrinkled, damp, or curled paper in the paper
tray?
➠
Always use dry, undamaged paper.
Is the paper properly set in the cassette or the tray?
➠
Always load paper correctly.
Are there any pieces of misfed paper or other materials
in the machine?
➠
Make sure that the paper path is completely
cleared of paper and other material after a misfeed.
❐ If you cannot correct the problem by taking the above actions, please contact
your service representative.
co-6
W
H
A
T T
O
D
O
IF SOM
ET
HIN
G
GOES W
R
ON
G
IF YOUR COPIER DOES NOT OPERATE AS YOU WANT
57