Temporarily Stopping One Job To Copy
Something Else (Interrupt Copying)
Use the Interrupt key to interrupt a multicopy run to make urgently needed
copies.
❐
Regarding functions that cannot be used together with this function,
☛
see
page 53.
Without the optional document feeder
1
Press the Interrupt key. The cop-
ier will stop the copy run and
store the present settings in the
memory. The copier will return to
the ready condition.
❐
The reproduction ratio will not be re-
set.
2
Remove the previous original. Set
your original for interrupt copying
on the exposure glass.
☛
See
page 19.
3
Make your copies.
4
After interrupt copying is com-
pleted, press the Interrupt key
again. The copier will recall the
previous copy settings.
co-5
C
OPY
IN
G
BASIC OPERATION
33
Summary of Contents for FT4422
