Ricoh FT4422 Operating Instructions Manual Download

Page: 39 / 108

From 2 Facing Pages To 2 One-sided Copies

❐

The maximum paper size that can be used in this mode is as follows:

, 8

1/2

" x 11"

❐

The Auto Paper Select cannot be selected with this function.

❐

The bypass feed table cannot be used with this function.

❐

Regarding functions that cannot be used together with this function,

☛

see

page 53.

Press the Function key. Then
press 1 on the Number keys.

❐

To cancel this function, press the
Function key again.

Start with the last page of your
book original and work your way
to the beginning.
Place the original

face down

the exposure glass.

❐

The original must be centered ac-
cording to the size marks on the left
scale.

co-5

OPY

MAKING ONE-SIDED COPIES FROM VARIOUS ORIGINALS

Summary of Contents for FT4422













































































































Search results

Summary of Contents for FT4422

Reviews:

Related manuals for FT4422

Brands by name

Popular brands

Ricoh FT4422, Operating Instructions Manual

Search results

Summary of Contents for FT4422

Reviews:

Related manuals for FT4422

Brands by name

Popular brands