IF YOUR COPIER DOES NOT OPERATE AS
YOU WANT
Check the followings:
Copier’s condition
Action
Nothing happens when the
main switch is turned on.
Check the power cord. Is it properly plugged
into the outlet?
➠
Plug it in firmly.
d
is lit.
Load paper.
☛
See page 59.
f
is blinking or lit.
Add toner.
☛
See page 63.
Y
is lit.
Remove misfed paper.
☛
See page 64.
r
Energy Saver is lit.
Your machine is in the Energy Saver condition.
➠
Press any key except the Start key to
return to the ready condition.
U code is displayed on the
copy counter.
U1
Close the right cover that is under the cassette.
U2
The copier is set for user codes. Enter your user
code (4 digits).
Insert the optional key counter correctly.
U4
Reset the optional sorter correctly.
U6
Call your service representative.
E code is displayed on the
copy counter or three digit
indicator.
Turn the main switch off, wait a few seconds,
and then turn it on. If the E code appears again,
call your service representative and tell which
code is on. Check the code as follows:
ex.)
E 1 2
By pressing the Recall/Enter key,
this code is displayed.
This code is displayed first.
co-6
IF YOUR COPIER DOES NOT OPERATE AS YOU WANT
56
Summary of Contents for FT4422
