Ricoh D127, Field Service Manual

Page: 309 / 474

5985
Device Setting
The NIC and USB support features are built into the GW controller. Use this SP to enable
and disable these features. In order to use the NIC and USB functions built into the
controller board, these SP codes must be set to "1".
001 On Board NIC
[0 to 2 / 0 / 1 /step]
0: OFF, 1: ON, 2: ON: Limited
When the "Function limitation" is set, "On board NIC" is limited
only for the @Remote or LDAP/NT authentication.
• Other network applications than @Remote or LDAP/NT
authentication are not available when this SP is set to "2".
Even if you can change the initial settings of those network
applications, settings may not actually work.
002 On Board USB
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
5987 Mech. Counter [0: OFF / 1: ON]
001
Gives the counter list text to the SD card inserted in the service slot.
In the SD card, the folder named “SD_COUNTER” must be placed in the root directory.
5990
SP Print Mode SMC Print
In the SP mode, press Copy Window to move to the copy screen, select the paper size,
then press Start. Select A4/LT (Sideways) or larger to ensure that all the information
prints. Press SP Window to return to the SP mode, select the desired print, and press
"EXECUTE".
001 All (Data List)
002 SP (Mode Data List)
003 User Program
004 Logging Data
005 Diagnostic Report
006 Non-Default (Prints only SPs set to values other than defaults.)
System Service Mode
101