Ricoh D127, Field Service Manual, Page: 87 / 474

1. Push the spring [A] located on the opposite side of the scanner motor [B] to loosen the belt [C] from
the scanner motor gear.
2. Remove the screws on the top of the scanner motor [B] ( x 4).
3. Turn the scanner motor [B] back. Then remove the screws and the harness on the back ( x 2
x1).
Scanner HP Sensor
1. Rear cover ( p.78 "Rear Cover")
2. Scanner Cover and Exposure Glass ( Scanner Cover and Exposure Glass)
3. Two of the brackets [A] [B] and the rail [C] ( x 6)
4. Scanner HP sensor [D] (
x 1, x 1)
Scanner Unit
85