Ricoh D127, Field Service Manual

Page: 325 / 474

8 205
S:LSize Scan PGS CTL [0 to 99999999 / 0 / 1]
These SPs count the total number of large pages input with the scanner for scan jobs
only. Large size paper (A3/DLT) scanned for fax transmission is not counted.
• These counters are displayed in the SMC Report, and in the User Tools display.
8 221
ADF Org Feeds CTL [0 to 99999999 / 0 / 1]
These SPs count the number of pages fed through the ADF for front and back side
scanning.
001 Front
Number of front sides fed for scanning:
With an ADF/ARDF that can scan both sides simultaneously, the
Front side count is the same as the number of pages fed for either
simplex or duplex scanning.
With an ADF/ARDF that cannot scan both sides simultaneously, the
Front side count is the same as the number of pages fed for duplex
front side scanning. (The front side is determined by which side the
user loads face up.)
002 Back
Number of rear sides fed for scanning:
With an ADF/ARDF that can scan both sides simultaneously, the
Back count is the same as the number of pages fed for duplex
scanning.
With an ADF/ARDF that cannot scan both sides simultaneously, the
Back count is the same as the number of pages fed for duplex rear-
side scanning.
• When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
• If a jam occurs during the job, recovery processing is not counted to avoid double counting. Also,
the pages are not counted if the jam occurs before the first sheet is output.
System Service Mode
117