Ricoh D127, Field Service Manual

Page: 151 / 474

10. Confirmation message appears on the LCD.
11. Touch "Yes" to proceed.
12. Reconfirmation message appears on the LCD.
13. Touch "Yes" to uninstall the browser unit.
14. You will see "Uninstalling the extended feature... Please wait.", and then "Completed".
15. Touch "Exit" to go back to the setting screen.
16. Exit "User/Tools" setting, and then turn off the main power switch.
17. Remove the SD card of the browser unit from SD card slot 2 (lower).
18. Overwrite the updated program in the "sdk" folder of the browser unit application with PC.
19. Do the "Installation Procedure" to install the browser unit.
Handling Firmware Update Errors
An error message shows in the first line if an error occurs during a download. The error code consists of
the letter "E" and a number ("E20", for example).
Error Message Table
Code Meaning Solution
20 Cannot map logical address Make sure the SD card is inserted correctly.
21 Cannot access memory HDD connection incorrect or replace hard disks.
22
Cannot decompress compressed
data Incorrect ROM data on the SD card, or data is
corrupted.
23
Error occurred when ROM
update program started Controller program abnormal. If the second attempt
fails, replace controller board.
24 SD card access error
Make sure SD card inserted correctly, or use another
SD card.
30
No HDD available for stamp
data download
HDD connection incorrect or replace hard disks.
31
Data incorrect for continuous
download Insert the SD card with the remaining data required for
the download, the re-start the procedure.
Using SP Mode
149