Ricoh D067 Service Manual Download Page 522

Page: 522 / 676

Fax Error Codes

SM Appendix

6-23

D067/D068/D069/D072

Appe

ndix:

Fax T

rou

ble-

shooting

Guide

Code

Meaning

Suggested Cause/Action

15-61

Attachment File Format

Error

The attached file is not TIFF format.

15-62

TIFF File Compatibility

Error

Could not receive transmission due to:

Resolution

error

Image of resolution greater than 200 dpi

without extended memory.

Resolution is not supported.

Page size error

The page size was larger than A3.

Compression

error

File was compressed with other than MH, MR,

or MMR.

15-63 TIFF Parameter Error

The TIFF file sent as the attachment could not be

received because the TIFF header is incorrect:

The TIFF file attachment is a type not

supported.

The TIFF file attachment is corrupted.

Software

error.

15-64 TIFF Decompression Error

The file received as an attachment caused the

TIFF decompression error:

The TIFF format of the attachment is

corrupted.

Software

error.

15-71 Not Binary Image Data

The file could not be received because the

attachment was not binary image data.

15-73 MDN

Status

Error

Could not find the Disposition line in the

header of the Return Receipt, or there is a

problem with the firmware.

Summary of Contents for D067





































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D067

Reviews:

Brands by name

Popular brands

Ricoh D067, Service Manual

Search results

Summary of Contents for D067

Reviews:

Brands by name

Popular brands