Ricoh D067, Service Manual

Page: 509 / 676

Fax Error Codes
D067/D068/D069/D072 6-10 SM Appendix
Code Meaning Suggested Cause/Action
0-87
The control channel started
after an unsuccessful
primary channel.
ƒ
The receiving terminal restarted the control
channel because data reception in the primary
channel was not successful.
ƒ This does not result in an error
communication.
0-88
The line was disconnected
because PPR was
transmitted/received 9
(default) times within the
same ECM frame.
ƒ Try using a lower data rate at the start.
ƒ Try adjusting the cable equalizer setting.
2-11
Only one V.21 connection
flag was received
ƒ Replace the FCU.
2-12 Modem clock irregularity
ƒ
Replace the FCU.
2-13 Modem initialization error
ƒ Turn off the machine, then turn it back on.
ƒ Update the modem ROM.
ƒ Replace the FCU.
2-23
JBIG compression or
reconstruction error
ƒ Turn off the machine, then turn it back on.
2-24 JBIG ASIC error ƒ Turn off the machine, then turn it back on.